Mopar Remote Start System User Manual download pdf (Page 3)

Install Remote Start 2-Way DNA into the

control module.

A. Insert DNA into the control module.

Ensure the DNA assembly snaps completely

in place.

Install Window mount Antenna

A. Mount antenna to the top driver’s side

windshield as shown.

B. Connect the 4-way antenna connector

to the antenna. Route the antenna

wire above the headliner to the

driver’s A-pillar. Temporarily remove

the A-pillar rubber gasket and run the

antenna lead down through the left

side dash opening. Replace the

rubber gasket. Ensure the antenna is

securely tucked above the headliner

and is not visible along the entire

length.

C. Connect the 5-way antenna connector

to the DNA as shown.

Bottom view of PC module

Transmitter, Tach rate and Option Programming

A. Refer to the following pages or the vehicle-specific Mopar Remote

Start installation manual, for system programming. Use the

button for programming purposes.

1 2 3 4 5 6 7 8 ... 11 12

No comments

Mopar Remote Start System User Manual Page 3